diff --git a/Makefile b/Makefile
index 7c890cc328..693f3edc1a 100644
--- a/Makefile
+++ b/Makefile
@@ -150,15 +150,24 @@ export SHELL=/bin/bash
 all: precommit
 
 $(BUILD_DIRS_NATIVE): prerequisites
-	@ arch=`uname -m`; \
-          if [ "$$arch" == "armv7l" ]; \
+	@ if [ "$$TOOLCHAIN" == "" ]; \
           then \
-           readelf -A /proc/self/exe | grep Tag_ABI_VFP_args && arch=$$arch"-hf" || arch=$$arch"-el";\
+            arch=`uname -m`; \
+            if [ "$$arch" == "armv7l" ]; \
+            then \
+              readelf -A /proc/self/exe | grep Tag_ABI_VFP_args && arch=$$arch"-hf" || arch=$$arch"-el"; \
+            fi; \
+            TOOLCHAIN="build/configs/toolchain_linux_$$arch.cmake"; \
           fi; \
+	  if [ -d "$@" ]; \
+	  then \
+		grep -s -q "$$TOOLCHAIN" $@/toolchain.config || rm -rf $@ ; \
+	  fi; \
 	  mkdir -p $@ && \
           cd $@ && \
-          cmake -DENABLE_VALGRIND=$(VALGRIND) -DENABLE_LOG=$(LOG) -DENABLE_LTO=$(LTO) -DCMAKE_TOOLCHAIN_FILE=build/configs/toolchain_linux_$$arch.cmake ../../.. &>cmake.log || \
-          (echo "CMake run failed. See "`pwd`"/cmake.log for details."; exit 1;)
+          cmake -DENABLE_VALGRIND=$(VALGRIND) -DENABLE_LOG=$(LOG) -DENABLE_LTO=$(LTO) -DCMAKE_TOOLCHAIN_FILE=$$TOOLCHAIN ../../.. &>cmake.log || \
+          (echo "CMake run failed. See "`pwd`"/cmake.log for details."; exit 1;); \
+	echo "$$TOOLCHAIN" > toolchain.config
 
 $(BUILD_DIRS_NUTTX): prerequisites
 	@ [ "$(EXTERNAL_LIBC_INTERFACE)" != "" ] && [ -x `which $(EXTERNAL_C_COMPILER)` ] && [ -x `which $(EXTERNAL_CXX_COMPILER)` ] || \
diff --git a/build/configs/toolchain_linux_i686.cmake b/build/configs/toolchain_linux_i686.cmake
index 2eabbc8da3..053bc7771e 100644
--- a/build/configs/toolchain_linux_i686.cmake
+++ b/build/configs/toolchain_linux_i686.cmake
@@ -15,5 +15,7 @@
 set(CMAKE_SYSTEM_NAME Linux)
 set(CMAKE_SYSTEM_PROCESSOR x86)
 
-set(CMAKE_C_COMPILER i686-linux-gnu-gcc)
-set(CMAKE_CXX_COMPILER i686-linux-gnu-g++)
+find_program(CMAKE_C_COMPILER NAMES i686-linux-gnu-gcc i686-unknown-linux-gnu-gcc)
+find_program(CMAKE_CXX_COMPILER NAMES i686-linux-gnu-g++ i686-unknown-linux-gnu-g++)
+# FIXME: This could break cross compilation, when the strip is not for the target architecture
+find_program(CMAKE_STRIP NAMES i686-linux-gnu-strip i686-unknown-linux-gnu-strip strip)
diff --git a/jerry-core/parser/js/opcodes-dumper.cpp b/jerry-core/parser/js/opcodes-dumper.cpp
index 0152ee1540..dda70b24a2 100644
--- a/jerry-core/parser/js/opcodes-dumper.cpp
+++ b/jerry-core/parser/js/opcodes-dumper.cpp
@@ -1171,7 +1171,10 @@ dump_call_additional_info (opcode_call_flags_t flags, /**< call flags */
 
   const opcode_t opcode = getop_meta (OPCODE_META_TYPE_CALL_SITE_INFO,
                                       flags,
-                                      (flags & OPCODE_CALL_FLAGS_HAVE_THIS_ARG) ? this_arg.data.uid : INVALID_VALUE);
+                                      (idx_t) (flags & OPCODE_CALL_FLAGS_HAVE_THIS_ARG
+                                               ? this_arg.data.uid
+                                               : INVALID_VALUE));
+
   serializer_dump_op_meta (create_op_meta_000 (opcode));
 } /* dump_call_additional_info */
 
diff --git a/tools/precommit-full-testing.sh b/tools/precommit-full-testing.sh
new file mode 100755
index 0000000000..d98fec92c8
--- /dev/null
+++ b/tools/precommit-full-testing.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+
+# Copyright 2015 Samsung Electronics Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+OUT_DIR="$1"
+shift
+
+TARGETS="$1"
+shift
+
+RUN_IDS=""
+
+for TARGET in ${TARGETS}
+do
+ ENGINE=${OUT_DIR}/${TARGET}/jerry
+ LOGS_PATH_FULL=${OUT_DIR}/${TARGET}/check
+
+ # Full testing
+ INDEX=0
+ for TESTS_PATH in "./tests/jerry" "./tests/jerry-test-suite/precommit_test_list"
+ do
+   ./tools/runners/run-precommit-check-for-target.sh "${ENGINE}" "${LOGS_PATH_FULL}"/"${INDEX}" "${TESTS_PATH}" &
+   RUN_IDS="${RUN_IDS} $!";
+   INDEX=$((INDEX + 1))
+ done
+done
+
+RESULT_OK=1
+for RUN_ID in ${RUN_IDS}
+do
+  wait "${RUN_ID}" || RESULT_OK=0
+done;
+[ ${RESULT_OK} -eq 1 ] || exit 1
+
+echo -e "Full testing completed successfully\n\n================\n\n"
diff --git a/tools/precommit.sh b/tools/precommit.sh
index 04be709292..b253786a84 100755
--- a/tools/precommit.sh
+++ b/tools/precommit.sh
@@ -57,38 +57,4 @@ echo -e "All targets were built successfully. Starting unit tests' run.\n"
 $MAKE unittests_run || exit 1
 echo -e "\nUnit tests completed successfully. Starting full testing.\n"
 
-RUN_IDS=""
-
-for TARGET in $TARGETS
-do
- ENGINE=$OUT_DIR/$TARGET/jerry
- LOGS_PATH_PARSE_ONLY=$OUT_DIR/$TARGET/check_parse_only
- LOGS_PATH_FULL=$OUT_DIR/$TARGET/check
-
- # Parse-only testing
- INDEX=0
- for TESTS_PATH in "./tests/benchmarks/jerry"
- do
-   ./tools/runners/run-precommit-check-for-target.sh $ENGINE $LOGS_PATH_PARSE_ONLY/$INDEX $TESTS_PATH --parse-only &
-   RUN_IDS="$RUN_IDS $!";
-   INDEX=$((INDEX + 1))
- done
-
- # Full testing
- INDEX=0
- for TESTS_PATH in "./tests/jerry" "./tests/jerry-test-suite/precommit_test_list"
- do
-   ./tools/runners/run-precommit-check-for-target.sh $ENGINE $LOGS_PATH_FULL/$INDEX $TESTS_PATH &
-   RUN_IDS="$RUN_IDS $!";
-   INDEX=$((INDEX + 1))
- done
-done
-
-RESULT_OK=1
-for RUN_ID in $RUN_IDS
-do
-  wait $RUN_ID || RESULT_OK=0
-done;
-[ $RESULT_OK -eq 1 ] || exit 1
-
-echo -e "Full testing completed successfully\n\n================\n\n"
+./tools/precommit-full-testing.sh "${OUT_DIR}" "${TARGETS}" || exit 1
diff --git a/tools/runners/run-tests-remote.sh b/tools/runners/run-tests-remote.sh
new file mode 100755
index 0000000000..073a5d8a97
--- /dev/null
+++ b/tools/runners/run-tests-remote.sh
@@ -0,0 +1,80 @@
+#!/bin/bash
+
+# Copyright 2015 Samsung Electronics Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+TARGET="$1" #debug.linux release.linux
+TARGET_IP="$2" # ip address of target board
+TARGET_USER="$3" # login
+TARGET_PASS="$4" # password
+
+if [ $# -lt 4 ]
+then
+  echo "This script runs ./jerry/* and ./jerry-test-suite/* tests on the remote board."
+  echo ""
+  echo "Usage:"
+  echo "  1st parameter: target to be tested: {debug.linux, release.linux}"
+  echo "  2nd parameter: ip address of target board: {110.110.110.110}"
+  echo "  3rd parameter: ssh login to target board: {login}"
+  echo "  4th parameter: ssh password to target board: {password}"
+  echo ""
+  echo "Example:"
+  echo "  ./tools/runners/run-tests-remote.sh debug.linux 110.110.110.110 login password"
+  exit 1
+fi
+
+BASE_DIR=$(dirname "$(readlink -f "$0")" )
+
+OUT_DIR="${BASE_DIR}"/../.././build/bin
+LOGS_PATH_FULL="${OUT_DIR}"/"${TARGET}"/check
+
+export SSHPASS="${TARGET_PASS}"
+
+rm -rf "${LOGS_PATH_FULL}"
+
+mkdir -p "${LOGS_PATH_FULL}"
+
+REMOTE_TMP_DIR=$(sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" 'mktemp -d')
+REMOTE_TMP_TAR=$(sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" 'mktemp')
+LOCAL_TMP_TAR=$(mktemp)
+
+tar -zcf "${LOCAL_TMP_TAR}" \
+  "${BASE_DIR}"/../.././build/bin/"${TARGET}" \
+  "${BASE_DIR}"/../.././tests/benchmarks \
+  "${BASE_DIR}"/../.././tests/jerry \
+  "${BASE_DIR}"/../.././tests/jerry-test-suite \
+  "${BASE_DIR}"/../.././tools/runners \
+  "${BASE_DIR}"/../.././tools/precommit-full-testing.sh > /dev/null 2>&1
+
+sshpass -e scp "${LOCAL_TMP_TAR}" "${TARGET_USER}"@"${TARGET_IP}":"${REMOTE_TMP_TAR}"
+
+sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" \
+  "tar -zxf \"${REMOTE_TMP_TAR}\" -C \"${REMOTE_TMP_DIR}\"; rm \"${REMOTE_TMP_TAR}\";\
+  cd \"${REMOTE_TMP_DIR}\"; \
+  ./tools/precommit-full-testing.sh ./build/bin \"$TARGET\" > ./build/bin/\"${TARGET}\"/check/run.log 2>&1; \
+  echo \$? > ./build/bin/\"${TARGET}\"/check/IS_TEST_OK"
+
+sshpass -e scp -r "${TARGET_USER}"@"${TARGET_IP}":"${REMOTE_TMP_DIR}"/build/bin/"${TARGET}"/check/* "${LOGS_PATH_FULL}"
+sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" "rm -rf \"${REMOTE_TMP_DIR}\""
+
+STATUS=$(cat "${LOGS_PATH_FULL}"/IS_TEST_OK)
+
+if [ "${STATUS}" == 0 ] ; then
+  echo "${TARGET} testing passed."
+  exit 0
+else
+  echo "${TARGET} testing failed."
+  echo "See logs in ${LOGS_PATH_FULL} directory for details."
+  exit 1
+fi
\ No newline at end of file
diff --git a/tools/runners/run-unittests-remote.sh b/tools/runners/run-unittests-remote.sh
new file mode 100755
index 0000000000..0813c01974
--- /dev/null
+++ b/tools/runners/run-unittests-remote.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+
+# Copyright 2015 Samsung Electronics Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+TARGET_IP="$1"
+TARGET_USER="$2"
+TARGET_PASS="$3"
+
+if [ $# -lt 3 ]
+then
+  echo "This script runs unittests on the remote board."
+  echo ""
+  echo "Usage:"
+  echo "  1st parameter: ip address of target board: {110.110.110.110}"
+  echo "  2nd parameter: ssh login to target board: {login}"
+  echo "  3rd parameter: ssh password to target board: {password}"
+  echo ""
+  echo "Example:"
+  echo "  ./tools/runners/run-unittests-remote.sh 110.110.110.110 login password"
+  exit 1
+fi
+
+BASE_DIR=$(dirname "$(readlink -f "$0")" )
+
+OUT_DIR="${BASE_DIR}"/../.././build/bin
+
+rm -rf "${OUT_DIR}"/unittests/check
+
+mkdir -p "${OUT_DIR}"/unittests/check
+
+export SSHPASS="${TARGET_PASS}"
+REMOTE_TMP_DIR=$(sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" 'mktemp -d')
+
+sshpass -e scp "${BASE_DIR}"/../../tools/runners/run-unittests.sh "${TARGET_USER}"@"${TARGET_IP}":"${REMOTE_TMP_DIR}"
+sshpass -e scp -r "${OUT_DIR}"/unittests/* "${TARGET_USER}"@"${TARGET_IP}":"${REMOTE_TMP_DIR}"
+
+sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" "mkdir -p \"${REMOTE_TMP_DIR}\"/check; \
+                                                \"${REMOTE_TMP_DIR}\"/run-unittests.sh \"${REMOTE_TMP_DIR}\"; \
+                                                echo \$? > \"${REMOTE_TMP_DIR}\"/check/IS_REMOTE_TEST_OK"
+
+sshpass -e scp -r "${TARGET_USER}"@$"{TARGET_IP}":"${REMOTE_TMP_DIR}"/check "${OUT_DIR}"/unittests
+
+sshpass -e ssh "${TARGET_USER}"@"${TARGET_IP}" "rm -rf \"${REMOTE_TMP_DIR}\""
+
+STATUS=$(cat "${OUT_DIR}"/unittests/check/IS_REMOTE_TEST_OK)
+
+if [ "${STATUS}" == 0 ] ; then
+    echo "Unit tests run passed."
+    exit 0
+else
+    echo "Unit tests run failed. See ${OUT_DIR}/unittests/unit_tests_run.log for details."
+    exit 1
+fi